Kathrein UFC 762si - Manual (Page 13)

13
Press the

buttons to access the next line.
If necessary you can add another symbol rate for
the search for channels in addition to the usual
one (shown in grey). You can use the numeric pad
on the remote control to do this.
Press the

buttons to access the next line.
If necessary you can use the

buttons to
change the network search settings again.
Press the

buttons to access the next line.
Use the

buttons to perform the settings for
the channels to search for. You can select from
“All”, “Only encrypted” and “Only free to air”.
Press the

buttons to access the next line.
Pressing the button starts the search for
channels.
Press the

buttons to access the next line.
If necessary you can use the

buttons to
change the network search settings again.
Press the

buttons to access the next line.
Use the

buttons to perform the settings for
the channels to search for. You can select from
“All”, “Only encrypted” and “Only free to air”.
Press the

buttons to access the next line.
Pressing the button starts the search for
channels.
The following display appears (example):