KTI Networks KSD-800M - Manual (Page 62)

-62-
5.4.7 Update Firmware
This menu is used to perform firmware (switch software) upgrade via TFTP protocol. Before doing
TFTP operation, one TFTP server must be available in the network to where this switch is connected
and the new firmware file
image.bin is placed in the server.
Settings Description
TFTP Server IP Address Specify the IP address of the TFTP server
Firmware File Name Specify the file name of the new firmware
Apply Button to confirm the settings
5.4.8 Restore Default
This menu is used to restore all settings of the switch with factory default values. Note that this menu
might change the current IP address of the switch and make your current http connection lost.
5.4.9 Reboot System
This menu is used to reboot the switch unit with current configuration remotely. Starting this menu will
make your current http connection lost. You must rebuild the connection to perform any management
operation to the unit.