Lincoln Electric MAGNUM IM438-B - Manual (Page 8)

A-1 INSTALLATION
MAGNUM COOLER 10-I & 20-I
A-1
TECHNICAL SPECIFICATIONS – MAGNUM COOLERS 10-I AND 20-I
Model
Cooler 10-I Cooler 20-I
Product No. K873-1 K879-1
Input 220V 50/60 Hz 1 Phase 220V 50/60 Hz 1 Phase
Current Draw at Input .75 Amps 1.25 Amps
Rated Current Draw 1.0 Amps 1.6 Amps
Operating Pressure 45 psi (310 kPa) (3.0 bar) 60 psi (410 kPa) (4.0 bar)
Shutdown Pressure 60-65 psi (414-446 kPa)
(No delay after flow is (4.0-4.4 bar)
stopped)
Flow Range 0.1 to 0.8 gal/min (0.4 to 3.0 liters/min)
Typical MIG with Magnum 15’ (4.5m) gun 0.55-0.60 gal/min (2.1-2.3 liters/min)
Operating
Flow
TIG with Magnum 12.5’ (3.8m) torch 0.25-0.30 gal/min (1.0-1.2 liters/min)
Open Flow 0.8 (3.0 liters/min)
Reservoir Size 2.0 ga. (8.0 liters)
Coolant Requirement For Use Above Freezing: Tap, distilled, de-ionized, mineral water or well water.
For Use Below Freezing: 50% water and 50% automotive antifreeze mixture
such as Prestone, Peak or Zerex or 50% water and 50% pure ethylene glycol
mixture or any water alcohol mixture.
DO NOT USE: Prepackaged welding industry coolants. These coolants may
contain oil-based substances which attack the plastic components in the pump
of the Magnum Cooler and severely reduce pump life.
Weight Shipping 30 lbs. (13.6 kg) 34 lbs. (15.4 kg)
Reservoir 43 lbs. (19.5 kg) 47 lbs. (21.3 kg)
Full
Dimensions L 9.0 in. (229mm) 9.0 in. (229mm)
W 9.0 in. (229mm) 9.0 in. (229mm)
H Top Face 26.5 in. (673mm) 32.00 in. (815mm)
H Top 28.75 in. (730mm) 34.25 in. (870mm)
Handle
Undercarriage Use K874 K840-1*, K841-1*, K842-1*,
K874
* Not available at the time of printing.
MAR97