Lyson PHOTOCHROME R-38 - Manual

P hoto C hrome R-38
Refill Cartridge System
Installation Instructions
Note: Ensure that you read this document before attempting to install the Lyson RCS System.
Installing inks into this RCS system will be taken as an acceptance of the terms and conditions hereunder. Failure to follow these
instructions may result in damage to your printer and the voiding of the CIS warranty.
DISCLAIMER
As Lyson RCS are self installed by the user, Lyson is not responsible for any damages to your printer, whether they are or are not
related to the Lyson RCS. Please contact the store or dealer where the printer was purchased, or the printer manufacturer for any
problems or questions related to the printer and its operation.
If the Customer chooses to use ink in the system from a manufacturer other than Lyson, and is not satisfied with that ink, or it
clogs the printer or the RCS, it will be the Customers responsibility to pay for the parts to repair the system and restore it to
normal usage.
WARRANTY
Lyson RCS systems are warranted to be free from manufacturing defects for the period of six months from date of system
purchase.
RETURNS POLICY
We can only guarantee that the Lyson RCS will deliver Lyson ink just as well as a normal ink cartridge. We will not accept
unauthorized returns of used systems, nor can we accept returns of systems filled with an ink that the customer later decides does
not meet their specific needs. You are encouraged to take all steps necessary to verify that Lyson inks will produce a satisfactory
result before installing this RCS. If in doubt, ask for a print sample from your supplier .
IMPORTANT NOTE IMPORTANT NOTE IMPORTANT NOTE IMPORTANT NOTE
The Lyson Refill Cartridge System (RCS) relies on a unique cartridge reader chip, which reads your original OEM
brand cartridge chip, and conveys a permanently full status to the printer status monitor. Customers must ensure
that the original OEM brand cartridges which are to be replaced have at least 10% fill status remaining. Your new
cartridge chip ‘piggy backs’ on to your original OEM chip, using it’s encryption codes. The result is a refillable
cartridge which displays a permanently ‘full’ condition in your status monitor. Monitor the ink levels in each
cartridge visually simply open your printer cartridge lid periodically, to check each ink level in turn, as each
cartridge has a translucent case. It is extremely important never to allow any cartridge to run dry, as this can
endanger your printer ink head.