La Crosse Technology WS-8158U-IT - Manual

1
WS-8158U-IT
RADIO-CONTROLLED CLOCK WITH OUTDOOR WIRELESS
TEMPERATURE AND WEATHER FORECAST
INSTRUCTION MANUAL
Contents
Language
Page
__________________________________________________________________
English 1
French
Spanish
2
TABLE OF CONTENTS
Topic Page
Features 3
Battery Installation
4
Setting Up 5
Atomic time - WWVB Radio Controlled Time 5
Function keys 6
LCD Screen 6
Manual Settings 7
Changing the display mode 10
Alarm 10
Weather Forecast and Tendency 11
Outdoor transmitter 14
915 MHz Reception 14
Mounting 14
Care and maintenance
15
Specifications 16
Warranty 17
INSTANT TRANSMISSION is the state-of-the-
art new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate
update (every 4 seconds!) of all your outdoor
data measured from the transmitters: follow
your climatic variations in real-time!
This product offers:
3
LCD1
display
Battery cover
Hanging holes
LCD2
display
Foldable stands
FEATURES:
RADIO-CONTROLLED CLOCK:
 WWVB Radio controlled time with manual time setting
 Time display: hour, minute, second
 Alarm setting with snooze function
 Calendar display
 Weekday display (3 languages to choose from: English, Spanish, French,)
 Time zone setting
 Daylight savings time ON/OFF option (DST)
 Indoor and outdoor temperature display
 Temperature display in ºF/ ºC selectable
 Weather forecast with weather tendency indicator based on air pressure
 Wireless transmission at 915MHz
 Signal reception intervals at 4 seconds
 Low battery indicator
 Wall mount or freestanding
OUTDOOR TEMPERATURE TRANSMITTER:
 Remote transmission of outdoor temperature to the
radio-controlled clock by 915 MHz signals
 Wall mounting case
Function keys
Holder
4
ALKALINE BATTERIES ARE RECOMMENDED FOR USE IN BOTH UNITS. AVOID USING
RECHARGEABLE BATTERIES.
TO INSTALL / REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
(INSTALL BATTERIES IN TRANSMITTER BEFORE INSTALLING BATTERIES IN RADIO-
CONTROLLED CLOCK)
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow
the steps below:
1.
Remove the battery cover by pushing down towards bottom of transmitter and sliding
cover out.
2. Insert the batteries, observing the correct polarity (see marking inside battery
compartment).
3. Replace the battery cover on the unit.
TO INSTALL / REPLACE BATTERIES IN THE RADIO-CONTROLLED CLOCK
The radio-controlled clock uses 2 x AA,1.5V batteries. To install and replace the batteries,
please follow the steps below:
1.
Insert finger or other solid object in the space at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
REPLACING BATTERY(S):
For best performance, batteries should be replaced at least once a year to maintain the best
running accuracy. Ensure that the batteries used are new and the correct size.
Please help in the preservation of the environment and return used batteries
to an authorized depot.