Lanier 5635 - Manual (Page 127)

Interface Settings
User Tools Settings 5 - 11
Interface Settings
IP Address
Before using this machine with the network environment you must configure the IP address.
Default: 011.022.033.044
•
Do not use IP address that has been used for another machine. To get the addresses,
contact your network administrator.
•
Press arrow keys to move between each group of three numbers.
•
Press [Clear] if you enter the wrong number.
Sub-net Mask
A number used to mathematically “mask” or hide an IP address on the network by eliminating
those parts of the address that are alike for all the machine on the network.
Default: 000.000.000.000
•
Press arrow keys to move between each group of three numbers.
•
Press [Clear] if you enter the wrong number.
Gateway Address
A gateway is a connection or interchange point that connects two networks. Configure the gateway
address for the router or host computer used as a gate-way.
Default: 000.000.000.000
Note: To get the addresses, contact your network administrator.
Access Control and Access Mask
You can control the client access.Access control and Access mask set to be together.
Default: 000.000.000.000
•
If you do not want to set any limitation for this machine, use default settings.
•
Press [Clear] if you enter the wrong number.
Network Boot
Select how to set IP address from client.
Default: NONE
For details about settings consult your network administrator.
Effective Protocol
Select protocol, using in the network.
Default: TCP/IP: Effective, NetWare: Effective, NetBEUI: Effective, Platelike: Effective.