Lowrance electronic LMS-334c iGPS - Manual (Page 140)

132
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp
turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading
to river. Waypoint (5) ends the route. Fig. 6.
5. Move the cursor to the next point in the route, a spot where you need
to turn or change direction and press
ENT to set the next waypoint.
6. Repeat step five until the route reaches the destination.
7. To save the route, press EXIT . The unit reverts to the Edit Route
screen, with the route automatically named "Route 1" and stored in the
unit's internal memory.
You can edit the route and run other commands, but if you are finished
with the route for now, r e t u r n t o t h e m a i n p a g e d i s p l a y b y
p r e s s i n g
EXIT repeatedly.
Delete a Route
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to route name|
ENT .
3. Press
↓ → to
D
ELETE
| ENT |
← to
Y
ES
| ENT .
Tip:
You can also delete all routes at once:
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Highlight D ELETE A LL
| ENT |
← to
Y ES
| ENT .
Edit a Route Name
You can edit the route name if you want.
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to route name|
ENT | ENT .
5. 6. 4.