Lynx Professional Grills 27" Free Standing Grill L27PSR-2 - Manual (Page 35)

35
SIdE BURNER/LpSGE HOOKUp
buIlt-In InstallatIon
► shut off the gas supply at
the main valve.
► disconnect all plumbing
(if already attached) from
the grill and the gas supply
valve.
► Remove all the fittings from
the grill manifold.
► install the side burner into
the counter top cutout.
► connect the gas supply to
the grill and side burner as
shown in the two diagrams
on this page.
► turn the gas supply on and
leak test all connections.
(see indeX: “leak test” for
further details.)
cart InstallatIon
► shut off the gas supply at
the main valve.
► disconnect all plumbing
(if already attached) from
the grill and the gas supply
valve.
► Remove all the fittings from
the grill manifold.
► install the side burner onto
the cart according to the
directions supplied with
the cart mounting kit.
► connect the gas supply
to the grill and the side
burner as shown in the
diagrams on this page for
your gas type.
► turn the gas supply on and
leak test all connections.
(see indeX: “leak test” for
further details.)
Requires 3/4 - 1/2
Reducer