Lopi PEWTER 9850034 - Manual

21 DV Wilmington Face
Black 98500341 Carbon Patina 95700101
Page 1 of 1 17601413 5/13/13 © Travis Industries, Inc.
Compatibility:
• 21DV Fireplace
Packing List:
• Face
• Patina Touch-Up Kit (Patina Faces Only)
Hand-Rubbed Patina Finishes
The optional patina finish is hand applied by a skilled artisan to permanently alter the metal colors and texture
of the face. Each face is individually hand-polished and fired in an oven which imparts unique color subtleties
with no two finishes alike. The patina finish on your face is a “living” color and will age and antique over time.
Enjoy the timeless, rich luster of your beautiful new face.
Installation
! Make sure the fireplace is cool while installing the face.
Plated Surfaces
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.
Denatured
Alcohol
Soft Cloth
Tilt the face back
and insert the
bottom brackets
into the lower
slots until they
lock in place.
PLATED SURFACES:
Make sure the plated surfaces are clean before starting
the fireplace. Any marks left on plated surfaces may
become etched in place. Clean plated surfaces with
denatured alcohol and a soft cloth.
Lift and rotate the face forward
until the top brackets lock into the
upper slots.
b
a
36-3/4”
22-1/8”
The bottom of the face is 1-1/4” below the
base of the fireplace when installed.