Error message & possible solution – Lenovo LXH-GJ17L3 User Manual

Page 15

Advertising
background image

ERROR MESSAGE & POSSIBLE SOLUTION

NO SIGNAL INPUT


1. The computer is switched off.
2. The computer is dormancy.

CABLE NOT CONNECTED :

1. Check that the signal-cable is properly connected, If the connector is

loose, tighten the connector’s screws.

2. Check the signal-cable’s connection pins for damage.

INPUT THE RESOLUTION OUT OF THE RANGE:


Your computer has been set to unsuitable display mode, Set the computer to
display mode given in the following table.




15

Advertising
See also other documents in the category Lenovo Monitors: