Lincoln Electric K1309-21 - Manual

Stick TIG MIG Flux-Cored Subarc
Gouging
Processes
DC-400
Order
Advantage Lincoln
Multi-Process Switch, Remote Output Control, Deluxe
Adjustable Gas Regulator and Hose Kit, Undercarriage
Recommended General Options
LN-7, LN-7 GMA, LN-742, LN-8, LN-9, LN-9 GMA, LN-10,
DH-10, LN-15, LN-23P, LN-25, Cobramatic
® , NA-3, NA-5,
LT-7
Recommended Wire Feeders
K1308-11 DC-400 230/460/3/60
K1308-12 DC-400 (w/Multi-Process Switch) 230/460/3/60
K1309-20 DC-400 220/380/440/3/50/60
K1309-21 DC-400 (w/Multi-Process Switch) 220/380/440/3/50/60
Accessory Kit
Recommended Stick Options
Pro-Torch™ TIG Torches, TIG Module, Docking Kit, Hand
Amptrol™, Foot Amptrol, Remote Control Adapter, Amptrol
Adapter Kit, Water Valve, TIG Control Cable Extension
Recommended TIG Options
• Large, conveniently located switch makes it easy to
change between CC (Stick/TIG/arc gouging), CV
(MIG/flux-cored) and CV Submerged Arc modes.
• Arc force control adjusts short circuit current for a
soft arc or a forceful driving arc in the CC (Stick/TIG)
mode.
• Arc control adjustment changes pinch effect of the
arc to control spatter, fluidity, and bead shape in the
MIG/Flux-Cored mode.
• Capable of stick and DC TIG welding, and air carbon
arc gouging with up to 5/16" (8mm) diameter carbon
rods.
• Solid state circuitry provides extra long life for
repetitive welding applications.
• Outstanding welding performance with a single range
full output control potentiometer.
• Analog ammeter/voltmeter are standard.
• ± 10% input line voltage compensation for maintain-
ing weld consistency.
• Low profile case allows stacking machines up to
three high to conserve floor space. (Stacking not
recommended when using undercarriage.)
www.lincolnelectric.com
E5.20 11/02
MULTI-PROCESS WELDERS
DC
CV
CC 3
PHASE
60
Hz
50
Hz
Description
This heavy-duty, industrial, three-phase multi-process power source from
Lincoln Electric scores big in MIG, flux-cored, submerged arc, stick and DC
TIG welding. It's a great choice for arc gouging too. And flexibility doesn’t
mean complicated – the DC-400 is easy to set-up and use. Changeover
between processes is as simple as turning a switch with the factory or field
installed multi-process switch. On-board ammeter and voltmeter make
monitoring of key welding parameters a snap. Inductance and arc force
controls allow the operator to efficiently refine the arc for the job at hand.
Technical Specifications
Dimensions
Product Product Rated Output (1) Input Current @ H (2) x W x D Net Weight
Name Number Input Power Current /Voltage/Duty Cycle Rated Output Output Range in. (mm) lbs.(kg)
DC-400
K1308-11
K1308-12
K1309-20
K1309-21
230/460/3/60
220/380/440/
3/50/60
400A/36V/100%
(450A/38V/60%)
(500A/40V/50%)
78/39A
81/47/40A
60-500A
12-42V
27.5 x 22.3 x 33.1
(698 x 566 x 840)
473
(215)
(1) NEMA Class I Rated Output / Based on a 10 min. period.
(2) Add 3.3 in. (84mm) for lift bail.
400 Amp DC Multi-Process Welding Power Source
Output Input
(Shown with
Multi-Process
Switch option)