Lowrance electronic GlobalMap 4800M - Manual (Page 107)

101
A POI selected by the cursor, left, POI information screen, right.
NOTE:
Since the Go To Waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
ENT | EXIT while in the POI
Waypoint Information screen.
Find Interstate Highway Exits
1. From the Map Page, press MENU |
↓ to
H
IGHWAY
E
XITS
| ENT , which calls
up the Find Exit menu.
Find Highway Exits command, left, and Find Exit menu, right.
2. First, select a highway name by pressing ENT , which calls up the
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press
↑ or ↓
to change the first letter, then press
→ to move the cursor to the next
letter and repeat until the name is correct, then press ENT | ENT . B.
Jump down to the lower selection list by pressing ENT , then press
↓ or ↑
to select a highway from the list, then press ENT .