Lanier 5813 - Manual (Page 187)

Selecting Modes for Outside Designated Areas
171
5
Selecting Modes for Outside Designated
Areas
Reference
The available modes for area editing depend on the area shape. ⇒ P.182
“Combination Chart for Area Editing”.
For functions that cannot be used together in area editing,
⇒ P.182 “Combina-
tion Chart for Area Editing”.
More than one mode can be set. However, there are some limitations,
⇒ P.182
“Combination Chart for Area Editing”.
The modes that can be set for outside areas are as follows:
• Color/Image Adjustment: Image Density, Color Mode, Original Type, Im-
age Adjustment, Color Adjustment, Color Balance Adjustment
• Color Creation: Color Conversion, Color Erase, Color Background, Paint,
Type Mask
• Image Creation: Outline Image, Shadow Image, Positive/Negative
Note
❒ Color/Image Adjustment's default setting:
• Image Density - Manual Image Density
• Color Mode - Black
• Original Type - Text/Photo
❒ You can change the default settings. ⇒ P.211 “User Tools”.
❒ The way to set modes is basically the same as for the entire image. For details,
refer to each page.
• To fill an area with a selected color, select the Paint.
• Image Density (
⇒ P.28 “Adjusting Copy Image Density”.)
• Original Type (
⇒ P.36 “Selecting the Original Image Type”.)
• Color Adjustment (
⇒ P.140 “Color Adjustment”.)
• Color Conversion (
⇒ P.94 “Color Conversion”.)
• Color Background (
⇒ P.97 “Color Background”.)
• Type Mask (
⇒ P.99 “Type Mask”.)
• Outline Image (
⇒ P.101 “Outline Image”.)
• Positive/Negative ( ⇒ P.114 “Positive/Negative”.)
• Color Mode (
⇒ P.30 “Selecting a Color Mode”.)
• Image Adjustment ( ⇒ P.142 “Image Adjustment”.)
• Color Balance Adjustment (
⇒ P.131 “Color Balance Adjustment”.)
• Color Erase ( ⇒ P.96 “Color Erase”.)
• Shadow Image (
⇒ P.102 “Shadow Image”.)
• Save Area ( ⇒ P.169 “Save Area”.)
Cattleya2-2_FM.book Page 171 Thursday, December 14, 2000 8:17 PM