Headset controls and indicators – Plantronics Voyager 835 User Manual

Page 11

Advertising
background image

Action

Indicator Light

Tone

Check battery
power

Press and hold both the call
control and volume down
buttons for about 2 seconds.
The indicator light flashes red
to show the charge level.

red flashes Battery level

1

More than 2/3 full

2

1/3 - 2/3 full

3

Less than 1/3 full

None

Adjust the volume
(during call)

Tap the up or down
volume button

Blue flash

Brief low tone (2
low tones when
volume limit is
reached)

WARninG

Do not use headsets at high volumes for an extended period of time. Doing so can cause

hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for more
information on headsets and hearing.

Voice Dial

Press and hold the call
control button for 2 seconds

Blue flash repeating
every 2 seconds

None

Redial last number

Tap the call control
button twice

Blue flash repeating
every 2 seconds

Two brief low
tones

7

Headset Controls and indicators

Action

Indicator Light

Tone

Transfer a call from
headset to phone,
or from phone to
headset

While the call is in progress,
press and hold the call
control button for 2 seconds

None

Brief low tone

Enable/disable
LED standby and
online indicator

Press and hold both volume
buttons for 3 seconds

Fade in = Enabled
Fade out = Disabled

One brief low tone, 2
seconds of silence,
then 2 brief low tones

Advertising