Philips SCH530/10 - Manual (Page 6)


Using the appliance
Soother Thermometer
The most convenient way to measure your baby’s temperature is to use the
soother thermometer. This is also the most comfortable method for baby.
Don’t use for 30 minutes after the baby has had hot or cold drinks as this
causes an inaccurate measurement.
Push the on/off button (A-1) to switch on the thermometer. (The
display (A-2) shows an ‘L’ and a flashing ‘ °C’.)
Place the soother in the baby’s mouth and leave it there until the
thermometer beeps four times.
The display now shows the measured temperature and the °C sign
lights continuously.
Remove the soother from the baby’s mouth.
Push the on/off button to switch off the thermometer. (Doing this
extends battery power. The thermometer switches off automatically
after about 10 minutes.)
Checking the last meausred temperature
If you wish to compare temperatures then you can check to see what the
last measured temperature was.This can only be done once before a new
measurement. Push and hold the on/off button for about 3 seconds. The
display shows the last measured temperature and an ‘M’ for memory. When
you release the button this temperature is erased.
Battery low indication
This soother thermometer has a long-life battery which should last for
about 2 to 3 years. If the display shows a , the battery is low and the
thermometer has reached the end of its useful life. Do not use it any more.
Before disposing of the thermometer remove the battery and dispose of it in
an environmentally friendly manner. (To gain access to the battery unclip the
small cover.)
Digital flexible-tip thermometer
The soother thermometer is as accurate as the digital flexible-tip
thermometer and is more convenient to use. However, because rectal
-
-
-
-
-
ENGLISH EN