Pontiac Grand Prix 2001 - Manual (Page 307)

6-45
7. Remove the old bulb.
8. Place the new bulb into the socket.
9. Turn the lamp socket a quarter turn clockwise to
reinstall it.
10. Carefully reinstall the taillamp assembly by reversing
Steps 1 through 5. Be careful to avoid scratching or
chipping the vehicle’s paint.
11. Close the rear compartment.
License Plate Lamp
1. Remove the two assembly screws located on the
top panel of the license plate holder and pull down
the plate.
2. Turn the bulb socket a quarter turn counterclockwise
to remove from the assembly.
3. Remove the old bulb from the socket.
4. Place the new bulb into the socket.
5. Reverse Steps 1 and 2 to reinstall.