Porter-Cable 4216 - Manual (Page 42)

42
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.porter-cable.com. You can also
order parts from your nearest Porter-Cable Factory Service Center or Porter-Cable Authorized Warranty Service Center. Or, you can
call our Customer Care Center at (888) 848-5175.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about Porter-Cable, its factory service
centers or authorized warranty service centers, visit our website at www.deltaportercable.com or call our Customer Care Center
at (888) 848-5175. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We
cannot guarantee repairs made or attempted by others.
You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number,
etc.).
SERVICE
A complete line of accessories is available from your Porter-Cable Factory Service Center or a Porter-Cable Authorized Warranty
Service Center. Please visit our Web Site www.deltaportercable.com for a catalog or for the name of your nearest supplier.
Since accessories other than those offered by Porter-Cable have not been tested with this product, use of such acces-
sories could be hazardous. For safest operation, only Porter-Cable recommended accessories should be used with this product.
ACCESSORIES
TROUBLESHOOTING
For assistance with your tool, visit our website at www.deltaportercable.com for a list of service centers, or call the Porter-Cable
Customer Care Center at (888) 848-5175.
MAINTENANCE
To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before install-
ing and removing accessories, before adjusting or changing set-ups or when making repairs. An accidental start-up can
cause injury.
REPAIRS
For assistance with your tool, visit our website at www.deltaportercable.com for a list of service centers, or call the Porter-Cable
Customer Care Center at (888) 848-5175.
CLEANING
Periodically blowing dust and chips out of the motor housing using clean, dry compressed air is a suggested mainte-
nance procedure. To reduce the risk of serious personal injury, ALWAYS wear ANSI Z87.1 safety glasses while using compressed
air.
When cleaning, use only mild soap and a damp cloth on plastic parts. Many household cleaners contain chemicals
which could seriously damage plastic. Also, do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar
products which may seriously damage plastic parts.
NEVER let any liquid get inside the tool; NEVER immerse any part of the tool
into a liquid.