Pelican TH-50VX100U - Manual (Page 40)

40
Note:
“SIGNAL” setup menu displays a different setting condition for each input signal.
SET UP for Input Signals
SIGNAL menu
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OFF
OFF
ON
OFF
OFF
RGB
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (US)
SCREENSAVER
SIGNAL
For RGB
AUTO SYNC
1024 ×768
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA MODE
100 Hz REFRESH RATE
H-FREQ.
V-FREQ.
SIGNAL FORMAT
SIGNAL [ RGB ]
For COMPONENT For Digital
1024 ×768 XGA MODE
100 Hz
33.7 kHz
60.0 Hz
1125(1080)/60i
REFRESH RATE
H-FREQ.
V-FREQ.
SIGNAL FORMAT
SIGNAL [ COMPONENT ] SIGNAL [ Digital ]
100 Hz REFRESH RATE
33.7 kHz
60.0 Hz
1125(1080)/60i
H-FREQ.
V-FREQ.
108.0 MHz DOT CLOCK-FREQ.
SIGNAL FORMAT
XGA MODE
This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals
with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @
60Hz, and 1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve a
more appropriate and attractive display.
In addition, after making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE”
menu as necessary. (see page 30)
1024 ×768 XGA MODE
100 Hz REFRESH RATE
SIGNAL [ COMPONENT ]
2
change
1 select
1024Ч768 1366Ч768 1280Ч768
REFRESH RATE
This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen flicker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.
1024 ×768 XGA MODE
100 Hz REFRESH RATE
SIGNAL [ COMPONENT ]
2
change
1 select
100 Hz 50 Hz