Connections – Philips FWD570 User Manual
Page 12
12
English
Connections
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
●
Use the composite cable (yellow) to connect the
system’s
VIDEO jack to the video input jack on
the RF modulator.
●
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
Using S-Video In jack
●
Use the S-Video cable (not supplied) to connect
the system’s
S-VIDEO OUT jack to the S-
Video input jack (or labeled as Y/C or S-VHS) on
the TV set.
●
To listen to TV channels through this system, use
the audio cables (white/red) to connect
AUX
IN jacks to the corresponding AUDIO OUT
jacks on the TV set.