Pioneer AVX-P8DVD - Manual (Page 60)

4 Touch any of 18 to select the desired
level.
The parental lock level is set.
! LEVEL 8  Playback of the entire disc is pos-
sible (initial setting)
! LEVEL 7LEVEL 2  Playback of discs for
children and non-adult-oriented discs is
possible
! LEVEL 1  Playback of discs for children
only is possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.
! With some discs, parental lock operates to
skip certain scenes only, after which normal
playback resumes. For details, refer to the
discs instructions.
Changing the level
You can change the set parental lock level.
1 Touch SETUP and VISUAL and then
touch PARENTAL.
2 Touch 09 to input the registered code
number.
3 Touch ENTER.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon
is displayed. Touch C and input the cor-
rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.
4 Touch any of 18 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Refer to Changing the level on this page, and
touch C 10 times. The registered code number
is canceled, letting you register a new one.
Setting for digitaloutput
Set digital output correctly to match the com-
ponents you are using with this unit. There is
no need to change settings if this unit is not
connected for digital output.
! When using this unit with a Pioneer multi-
channel processor (DEQ-P8000), select
DOLBY/LPCM.
! When using this unit with a head unit fea-
tures digital input (e.g., DEX-P9), select
LPCM.
Important
Incorrect setting may result in noise and damage
to speakers so be sure to read the manuals of the
connected components.
1 Touch SETUP and AUDIO and then
touch DIGTL OUT.
2 Touch either of the following touch
panel keys to select the digital output set-
ting.
! DOLBY/LPCM  The Dolby Digital signal is
output as it is (initial setting)
! LPCM  The Dolby Digital signal is con-
verted to and output as a linear PCM signal
Setting up the DVD player
En
60
Section
11