Philips FW-C557/37 - Manual (Page 17)

17
English
Basic Operations
Dimming system’s display screen
You can select the desired brightness for the
display panel.
●
In any active mode, press DIM MODE (or
DIM on remote) repeatedly to turn on/off
dim mode.
➜
DIM is shown, except for DIM OFF mode.
Volume control
●
Adjust MASTER VOLUME (or press
VOL +/- on remote) to increase or
decrease the sound level.
➜
"
VOL MIN" is the minimum volume level and
"
VOL MAX" is the maximum volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"
MUTE" is displayed.
➜
To restore the volume, press MUTE again or
increase the volume level.
Sound control
MAX sound, DSC and VAC sound features
cannot be activated on the same time.
While in game mode, all the sound control
features are not available for selection, except
DBB and Game Sound control.
MAX sound
MAX sound provides the best mixture of
various sound features (DSC, VAC for example).
●
Press MAX SOUND (or MAX ON/OFF
on remote).
➜
If activated, the MAX SOUND button lights
up. All other sound effects (DSC, VAC or DBB)
will be switched off automatically
Digital Sound Control
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC repeatedly to select : OPTIMAL,
JAZZ, ROCK or POP.
Virtual Ambience Control
VAC provides a different type of environment-
based equalizer setting.
●
Press VAC repeatedly to select : HALL,
CINEMA, CONCERT, CYBER or ARCADE.
Dynamic Bass Boost
DBB enhances the bass response.
●
Press DBB repeatedly to select : DBB 1,
DBB 2, DBB 3 or DBB OFF.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
Automatic DSC-DBB and VAC-DBB
selection
The best DBB setting is generated automatically
for each DSC, VAC or Game Sound selection.
You can manually select the DBB setting that
best suits your listening environment.