Petsafe Cottageview Dog Kennel - Manual (Page 4)

4 1-888-632-4453
Determine Kennel Size
By using all 4 panels, you can expand your Cottageview Dog Kennel ™ to one of two traditional sizes:
7 ½ ft. (W) x 7 ½ ft. (L) 5 ft. (W) x 10 ft. (L)
Purchase additional Expansion Panels to further
customize the size and shape of your kennel.
__________________________________________________________________________________________________
Install Expansion Panels
1. Using a wrench, remove the two kennel clamps that are
attached to the wire mesh of each of the kennel panels ( 2A).
2. Remove the SunBlock Top ™ from the kennel by using wire
cutters to cut the cable ties. Note: for 5 ft. x 10 ft. set up you
can remove the cable ties from only one side of the SunBlock Top.
This will allow your dog to receive partial sun protection.
3. Using a wrench, loosen the kennel clamps so the kennel
panels can be disassembled to make room for the
expansion panels.
4. Using a wrench and two of the supplied kennel clamps,
attach expansion panel to the kennel. Position one clamp
approximately 4 inches from the top of the kennel and
one clamp approximately 6 inches from the bottom of the
kennel. For the safety of your dog, attach clamp so that
nut is on the outside of the kennel. See (2B) for clamp and
panel orientation.
5. Continue connecting remaining expansion panels using
wrench and two clamps per connection.
2A
2B
Step
1
Step
2