Printek Mt3-II - Manual (Page 22)

Configuration and Data Connectivity
16
Printer Graphic Commands
Printer Command String Printer Action
ESC a n Select dot line spacing between printed lines.
ESC J n Graphic Line Feed command
ESC P # Select Online mode, characters printed as received
ESC P $ Select Buffer mode, characters are printed on (^D)
ESC V n1 n2 data 8-bit Graphic command
ESC v n1 n2 data 8-bit Compressed Graphic Command
Magnetic Card Reader Control Commands
Printer Command String Printer Action
ESC M nnm CR Select MCR with nn auto timeout..
ESC C Cancel MCR read process.
Graphic Logo and Bar Code Commands
Command String Printer Action
ESC L G n Prepare printer to load image
ESC G 0x0FF Loading Logo Complete
ESC L g n Print stored logo image
ESC z n1 n2 L data Print Bar Code without visible text
ESC Z n1 n2 L data Print Bar Code with visible text
ESC Q J n Reverse Dot Feed
ESC Q Q n Set Out of Paper Sensitivity
ESC Q F m Set Forward Black Mark Seek
ESC Q B m Reverse Black Mark Seek
Printer Supervisory and Control Commands
Command String Printer Action
^V Buffer, power timer & battery status
^B Buffer status
ESC P ^ Print Battery Voltage
ESC P alpha Time and date print and control
ESC M 000 CR Disable the power down timer
ESC M nn0 CR Sets the power down timer to nn seconds
ESC M C Reset Auto power down to 20 seconds
ESC P ( Firmware version query
ESC P ) Hardware model query