Philips Norelco SPEED-XL 8175XL - Manual (Page 9)

ENGLISH
Trimming
To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.
Cleaning
C
◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head assembly
while motor is on.
16 ENGLISH
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Unplug the charging stand. The charging stand
may be wiped clean using a damp cloth.
C
1 The light above faucet symbol will start
blinking after each shave to remind you
that the razor needs to be cleaned (except
when the bottom light burns red).
Cleaning: Razor Heads
The quickest and easiest way to clean the razor
heads and hair chamber is to rinse them after
each use or at least once a week with hot water:
Water from the tap should be on a hot setting,
BUT BE CAREFUL TO TEST WATER FIRST SO
AS NOT TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
C
◗ While rinsing razor heads, water may drip
out of the base of razor. This is a normal
occurrence.
1 Always turn razor OFF, unplug from outlet
and remove cord from razor or charging
stand before cleaning.
C
2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
17