Set up bass peak level manager, Surround sound set up, Press enter – Pioneer VSX-D908TX User Manual
Page 35: Select setting start and press enter, Press enter to return to the previous screen, Vsx-d938tx
35
Surround Sound Set Up
SET
UP
Bass peak level manager
The LFE (Low Frequency Effect) channel in Dolby Digital, DTS and MPEG audio (VSX-D938TX only) program
sources can produce heavily concentrated ultra-low bass tones that may exceed the capabilities of your speaker
system. The following steps show you how to set the peak level for the ultra-low bass (LFE) channel. If
continuing from CROSSOVER NETWORK go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for
Surround Sound” (p.27) first.
1
Select BASS PEAK LEVEL MANAGER (if continuing
from CROSSOVER NETWORK it will already be
selected).
See “Setting Up for Surround Sound” on page 27 if you are unsure
how to do this.
Press ENTER.
Bass Peak Level Manager
[
Setting Start
]
[Setting Cancel]
[EXIT]
2
Select SETTING START and press ENTER.
MASTER VOLUME rotates to MIN (---dB). Then the test tone is
output to the sub woofer or front or surround speakers.
Bass Peak Manager
[
-50
]
[
Setting OK
]
Bass Peak Level
3
Press and hold the
3 until you hear the test tone from
the sub woofer and specify the peak LFE level.
Use the
2 or 3 arrows to gradually increase the level of the LFE
channel until the test tone begins to distort. Then go back and
leave the level setting at a point just before that. Press ENTER and
the receiver will remember this bass output level.
To exit before outputting the TEST TONE
Press ENTER.
To exit while outputting the TEST TONE
Press ENTER.
4
Press ENTER to return to the previous screen.
This completes the speaker setup.
If you select SETTING CANCEL and press ENTER, no settings
are input to the receiver but the screen remains on the TV. To
escape the screen, you must press EXIT.
S0URCE
DVD/LD
TV/SAT
VCR1
VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED
STANDARD
DSP
THX
MUTE
TV
VOLUME
MD/
TAPE1
TUNER
TV CONT
RECEIVER
MULTI
OPERATION
CLASS
MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DISPLAY
RF ATT
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2
/dts
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1
2
3
4
5
6
7
+10
8
9
0
DISC
Î
¶
7
3
8
1
¡
4
¢
+
-
+
-
+
-
MPEG
1-4
VSX-D938TX