Philips FWD14 - Manual (Page 24)

25
9 Play tape
recorder
Note
When you play or record a tape, the sound ‡
source cannot be changed.
Play tapes
You can also listen to tapes with this product.
1
Press SOURCE on the main unit to
select the tape source.
2
Press to open the tape door.
3
Load the tape with the open side
downward and the full spool to the left.
4
Press to start play.
To pause/resume play, press ‡ .
To fast rewind/forward the tape, ‡
press / .
To stop play, press ‡ .
Record form different sources
You can record from different sources.
Record from disc
1
Press DISC to select the disc source.
2
Place a disc on the tray with the printed
side facing up.
3
Press to open the tape compartment.
4
Insert a blank tape and close the tape
compartment.
5
Select the desired track(s).
7RUHFRUGDVSHFLÀFWUDFNSUHVV ‡ /
to select the track.
To start recording from a point
‡
within a track, press at the point.
7RUHFRUGWUDFNVLQDVSHFLÀF
‡
sequence, program the tracks (see
“Play options”>”Program”).
Program radio stations
manually
You can program a maximum of 20 preset FM
radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
[PROG] (program) blinks on the
»
display.
3
Press ALBUM/PRESET -/+ to allocate a
number (1 to 20) to this radio station,
then press PROG
WRFRQÀUP
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store ‡
another station in its place.
Select a preset radio station
1
In tuner mode, press ALBUM/PRESET
-/+ to select a preset number.
English
EN