Philips DVD Micro Theatre MCD759D - Manual (Page 40)

40
English
Other Functions
Setting sleep/wake-up timer
Sleep timer setting
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1
In power-on mode, press SLEEP/TIMER on
the remote repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
SLEEP 00
➜ SLEEP 10 ➜ SLEEP 20 ... SLEEP 80
➜ SLEEP 90 ➜ SLEEP 00
2
When you reach the desired length of time, stop
pressing SLEEP/TIMER.
➜ appears.
To deactivate the sleep timer
●
Press SLEEP/TIMER repeatedly until “
00” is
displayed, or press STANDBY-ON/ECO
POWER B (B on the remote).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1
Press and hold SLEEP/TIMER until the time
flashes on the display.
➜ ” TIME SET” scrolls. Then, the hour digits
flash on the display screen.
2
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
3
Press SLEEP/TIMER to confirm.
➜ The minute digits flash on the display screen.
4
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
5
Press SLEEP/TIMER to confirm the time
setting.
➜
”
OFF” flashes on the display screen.
6
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to select
“ON”.
➜ icon appears on the display screen.
To deactivate the timer
●
Select “OFF” at Step 6.
pg 001-046_MCD759D_37_Eng 2007.6.21, 14:39 40