Pioneer PDSP-1 - Manual (Page 37)

37
Adjusting the Sound
Changing
Surround Sound
Adjusting the Tone
Calling Up a Room
Sound Setting
Video and Audio
Timing
Compensations
Adjusting
Surround Effects
Displaying the
Data Screen
Displaying the Data Screen
Use this function to confirm information about the currently playing audio and video source, and room sound
settings.
1 Use the touch panel to select the PDSP menu.
From the HOME menu press ; from other menus, press .
2 Press the ENTER button.
The “Status” menu screen appears as shown below.
Status
Source Input 2 D
Memory 1
Mode
PLII Movie
Width 1.00
Item Contents Display Example
Source Input/Signal type Input 1-5, 2D (digital), 2A (analog)
Memory Preset sound setting 1-8, * (when a change has occurred to the called-
up sound setting)
Mode Audio mode type PLII Movie, PLII Music, Pro Logic, Stereo, Mono
Width Image width setting 0.00-1.00 (image width setting value), Off
3 After confirming the data, press the ENTER button.
The “Status” menu screen disappears.
“Selecting the Audio Mode”
(Dolby Pro Logic II)
P25
“Adjusting Surround Effects”
(Image width)
P34
“INPUT 1 – 5 connectors” P13
“Calling Up a Room Sound Setting”
(Memory 1-8)
P32