Peerless Industries KX-TDA15 User Manual
Kx-tda15/kx-tda30, Feature guide
Advertising
Thank you for purchasing the Panasonic KX-TDA15/KX-TDA30/KX-TDA100/KX-TDA200, Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA15/KX-TDA30/KX-TDA100/KX-TDA200: Version 1.1
KX-TDA15/KX-TDA30
Model
KX-TDA100/KX-TDA200
Hybrid IP-PBX
Feature Guide
Advertising
Table of contents
Document Outline
- Introduction
- Table of Contents
- Call Handling Features
- 1.1 Incoming Call Features
- 1.1.1 Incoming Trunk Call Features
- 1.1.1.1 Incoming Trunk Call Features—SUMMARY
- 1.1.1.2 Direct In Line (DIL)
- 1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
- 1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
- 1.1.1.5 Calling Line Identification (CLI) Distribution
- 1.1.1.6 Intercept Routing
- 1.1.1.7 Intercept Routing—No Destination
- 1.1.2 Internal Call Features
- 1.1.3 Incoming Call Indication Features
- 1.1.1 Incoming Trunk Call Features
- 1.2 Receiving Group Features
- 1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
- 1.4 Answering Features
- 1.5 Making Call Features
- 1.6 Memory Dialling Features
- 1.7 Busy Line/Busy Party Features
- 1.8 Toll Restriction (TRS)/Call Barring (Barring) Features
- 1.9 Automatic Route Selection (ARS) Features
- 1.10 Conversation Features
- 1.11 Transferring Features
- 1.12 Holding Features
- 1.13 Conference Features
- 1.14 Paging Features
- 1.15 Broadcasting Features (KX-TDA30/KX- TDA100/KX-TDA200 only)
- 1.16 Optional Device Features
- 1.17 Caller ID Features
- 1.18 Message Features
- 1.19 Proprietary Telephone (PT) Features
- 1.20 Integrated Services Digital Network (ISDN) Service Features
- 1.20.1 Integrated Services Digital Network (ISDN)
- 1.20.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
- 1.20.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
- 1.20.1.3 Advice of Charge (AOC)
- 1.20.1.4 Call Forwarding (CF)—by ISDN (P-MP)
- 1.20.1.5 Call Forwarding (CF)—by ISDN (P-P)
- 1.20.1.6 Call Hold (HOLD)—by ISDN
- 1.20.1.7 Call Transfer (CT)—by ISDN
- 1.20.1.8 Three-party Conference (3PTY)—by ISDN
- 1.20.1.9 Malicious Call Identification (MCID)
- 1.20.1.10 Completion of Calls to Busy Subscriber (CCBS)
- 1.20.1.11 ISDN Extension
- 1.20.1.12 ISDN Service Access by Keypad Protocol
- 1.20.1 Integrated Services Digital Network (ISDN)
- 1.21 E1 Line Service Features (KX-TDA100/KX- TDA200 only)
- 1.22 T1 Line Service Features (KX-TDA100/KX- TDA200 only)
- 1.23 Voice Mail Features
- 1.24 Portable Station (PS) Features
- 1.25 Administrative Information Output Features
- 1.26 Extension Controlling Features
- 1.27 Audible Tone Features
- 1.28 Networking Features
- 1.29 Computer Telephony Integration (CTI) Features
- 1.1 Incoming Call Features
- System Configuration and Administration Features
- Programming Instructions
- 3.1 Introduction
- 3.2 PC Programming
- 3.3 PT Programming
- 3.3.1 Programming Instructions
- 3.3.2 Basic Programming
- Date & Time [000]
- System Speed Dialling Number [001]
- System Speed Dialling Name [002]
- Extension Number [003]
- Extension Name [004]
- Extension Personal Identification Number (PIN) [005]
- Operator Assignment [006]
- Console Paired Telephone [007]
- Absent Message [008]
- Charge Margin [010]
- Charge Tax [011]
- Charge Rate per Unit [012]
- 3.3.3 System Programming
- Flexible Numbering [100]
- Time Service Switching Mode [101]
- Time Service Starting Time [102]
- Idle Line Access (Local Access) [103]
- System Password for Administrator—for PT Programming [110]
- System Password for User—for PT Programming [111]
- Manager Password [112]
- Verified Code [120]
- Verified Code Name [121]
- Verified Code Personal Identification Number (PIN) [122]
- Verified Code COS Number [123]
- Decimal Point Position for Currency [130]
- Currency [131]
- Main Processing (MPR) Software Version Reference [190]
- 3.3.4 Time Programming
- Hold Recall Time [200]
- Transfer Recall Time [201]
- Intercept Time [203]
- Hot Line Waiting Time [204]
- Automatic Redial Repeat Times [205]
- Automatic Redial Interval [206]
- Door Open Duration Time [207]
- Call Duration Count Starting Time for LCOT [208]
- DISA Delayed Answer Time [209]
- DISA Trunk-to-Trunk Call Prolong Time [210]
- DISA Intercept Time [211]
- 3.3.5 TRS/Barring/ARS Programming
- TRS/Barring Override by System Speed Dialling [300]
- TRS/Barring Denied Code [301]
- TRS/Barring Exception Code [302]
- Special Carrier Access Code [303]
- Emergency Number [304]
- ARS Mode [320]
- ARS Leading Number [321]
- ARS Routing Plan Table Number [322]
- ARS Exception Number [325]
- ARS Routing Plan Time Table [330]
- ARS Routing Plan Table (1–16) [331–346]
- ARS Carrier Name [350]
- ARS Trunk Group for Carrier Access [351]
- ARS Removed Number of Digits for Carrier Access [352]
- ARS Carrier Access Code [353]
- 3.3.6 Trunk Programming
- LCOT/BRI Trunk Connection [400]
- LCOT/BRI Trunk Name [401]
- LCOT/BRI Trunk Group Number [402]
- LCOT/BRI Trunk Number Reference [409]
- LCOT Dialling Mode [410]
- LCOT Pulse Rate [411]
- LCOT DTMF Minimum Duration [412]
- LCOT CPC Signal Detection Time—Outgoing [413]
- LCOT CPC Signal Detection Time—Incoming [414]
- LCOT Reverse Circuit [415]
- LCOT Pause Time [416]
- LCOT Flash/Recall Time [417]
- LCOT Disconnect Time [418]
- BRI Network Type [420]
- BRI DIL/DDI/MSN Selection [421]
- BRI Subscriber Number [422]
- BRI Layer 1 Active Mode [424]
- BRI Layer 2 Active Mode [425]
- BRI Configuration [426]
- BRI TEI Mode [427]
- DIL 1:1 Destination [450]
- DID Number [451]
- DID Name [452]
- DID Destination [453]
- Trunk Group Intercept Destination [470]
- Host PBX Access Code [471]
- Extension-to-Trunk Call Duration [472]
- Trunk-to-Trunk Call Duration [473]
- DISA Silence Detection [475]
- DISA Continuous Signal Detection [476]
- DISA Cyclic Signal Detection [477]
- Caller ID Signal Type [490] (KX-TDA30/KX-TDA100/KX-TDA200 only)
- Pay Tone Signal Type [491] (KX-TDA100/KX-TDA200 only)
- 3.3.7 COS Programming
- Trunk Group Number [500]
- TRS/Barring Level [501]
- Trunk Call Duration Limitation [502]
- Call Transfer to Trunk [503]
- Call Forwarding to Trunk [504]
- Executive Busy Override [505]
- Executive Busy Override Deny [506]
- DND Override [507]
- Account Code Mode [508]
- TRS/Barring Level for System Speed Dialling [509]
- TRS/Barring Level for Extension Lock [510]
- Manager Assignment [511]
- Permission for Door Open Access [512]
- Time Service Manual Switching [514]
- Wireless XDP Parallel Mode for Paired Telephone [515]
- Programming Mode Limitation [516]
- 3.3.8 Extension Programming
- EXtra Device Port (XDP) Mode [600]
- Terminal Device Assignment [601]
- Class of Service [602]
- User Group [603]
- Extension Intercept Destination [604]
- Call Forwarding—No Answer Time [605]
- CLIP/COLP Number [606]
- Incoming Call Distribution Group Member [620]
- Incoming Call Distribution Group Delayed Ringing [621]
- Incoming Call Distribution Group Floating Extension Number [622]
- Incoming Call Distribution Group Name [623]
- Incoming Call Distribution Group Distribution Method [624]
- Destination for Overflow Time Expiration [625]
- Overflow Time [626]
- Destination When All Busy [627]
- Queuing Call Capacity [628]
- Queuing Hurry-up Level [629]
- Queuing Time Table [630]
- Sequences in Queuing Time Table [631]
- Maximum Number of Agents [632]
- User Groups of a Paging Group [640]
- External Pagers of a Paging Group [641]
- User Groups of a Pickup Group [650]
- VM Group Floating Extension Number [660]
- Idle Extension Hunting Type [680]
- Idle Extension Hunting Group Member [681]
- PS Registration [690]
- PS Termination [691]
- Personal Identification Number (PIN) for PS Registration [692]
- CS Status Reference [699]
- 3.3.9 Resource/Interface Programming
- External Pager Floating Extension Number [700]
- Music Source Selection for BGM (with the KX-TDA15/KX-TDA30)/ BGM2 (with the KX-TDA100/KX-TDA200) ...
- Music on Hold [711]
- Music for Transfer [712]
- Doorphone Call Destination [720]
- Doorphone Number Reference [729]
- Outgoing Message (OGM) Floating Extension Number [730]
- Outgoing Message (OGM) Name [731]
- DISA Security Mode [732]
- 3.3.10 SMDR & Maintenance Programming
- RS-232C Parameter—New Line Code [800]
- RS-232C Parameter—Baud Rate [800]
- RS-232C Parameter—Word Length [800]
- RS-232C Parameter—Parity Bit [800]
- RS-232C Parameter—Stop Bit Length [800]
- External Modem Control [801]
- SMDR Page Length [802]
- SMDR Skip Perforation [803]
- SMDR Outgoing Call Printing [804]
- SMDR Incoming Call Printing [805]
- Remote Programming [810]
- Modem Floating Extension Number [811]
- ISDN Remote Floating Extension Number [812]
- 3.3.11 Card Programming
- Slot Card Type Reference [900]
- Slot Card Deletion [901]
- Slot Card Reset [902]
- OPB3 Option Card Type Reference [910] (KX-TDA100/KX-TDA200 only)
- OPB3 Option Card Deletion [911] (KX-TDA100/KX-TDA200 only)
- Appendix
- 4.1 Capacity of System Resources
- 4.1.1 Capacity of System Resources
- 4.2 Tones/Ring Tones
- 4.2.1 Tones/Ring Tones
- 4.3 List of Abbreviations
- 4.3.1 List of Abbreviations
- 4.4 Revision History
- 4.4.1 KX-TDA100/KX-TDA200 Version 1.1
- New Contents
- Changed Contents
- 4.4.2 KX-TDA30 Version 1.1
- New Contents
- Changed Contents
- 4.4.1 KX-TDA100/KX-TDA200 Version 1.1
- 4.1 Capacity of System Resources
- Index
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- X