Philips 6716X - Manual (Page 14)

ENGLISH
15
Cleaning
Important
◗ Always turn Razor OFF, unplug from outlet and
remove cord from razor before cleaning.
◗ Always store Razor with Protective Razor Head
Cap on shaving heads.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
After each use: Razor
1 Switch razor off.
C
2 Press the Razor Head Release Button
located under razor heads on front side of
Razor.
C
3 Flip open the Razor Head Assembly and
clean the razor heads and hair chamber by
running under hot water.Water from the
tap should be on a hot setting,
BUT BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
C
4 Rinse the outside of the shaving unit.
5 Shake off excess water and close Razor
Head Assembly.
2
6711X_6701X DFU.rQXD 11/5/03 6:09 PM Page 15 (Black plate)