Pioneer PDR-W839 - Manual (Page 35)

35
6 Finalizing and Erasing
En
Clearing skip IDs:
1 Use the
4 and ¢ buttons (or the
jog dial) to select the track you want
to clear the skip ID for.
Skip play must be off (the SKIP ON indicator does not light
in the display) for you to choose tracks with skip IDs. Press
SKIP PLAY on the remote to turn it off. The SKIP indicator
lights if the track selected is marked with a skip ID.
2 Press SKIP CLEAR.
The SKIP indicator starts to blink.
O2 SKIP CLR?
SKIP
• If the track you selected in step 2 above didn’t have a skip ID
set, playback jumps to the next track that does.
• Use
4 and ¢ (or the jog dial) if you want to change
the track again here.
• If there's no room left on the disc to clear a skip ID, the
display will show the message SKIP FULL .
3 Press SKIP CLEAR again to clear the
skip ID for the track playing.
The SKIP indicator disappears once the skip ID has been
cleared.
• To cancel, press
6 (or
SKIP SET ).
3
- COMPACT DISC MULTI CHANGER COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ˘≤/ COMPACT DISC RECORDER / MULTI-CD CHANGER
Legato Link Conversion CD TEXT
CD-R CONTROL
OPEN/CLOSE
6 7
0
REC VOL
PUSH ENTER
¶
4 Clear further skip IDs by repeating
steps 1 to 3.
5 When you're finished, press
7 to stop
the disc and press
0 (CD-R side).
Until you eject the disc, the recorder stores the skip ID
information in its memory. On pressing
0, the recorder
writes the skip ID information onto the disc.
Be careful: don’t switch off the unit before ejecting the
disc—you’ll lose this sessions skip ID changes!
TIME
SET CLEAR
7
3
4 ¢
SKIP PLAY SKIP ID
Playing a disc with skip IDs
If you're not sure whether a disc has skip IDs programmed, look for
the
SKIP ON indicator in the display when you load a disc—it
will light automatically if one or more are present.
1 Load a disc.
The SKIP ON indicator lights up if there are any skip IDs
on the disc. This means the player won't play those tracks
that are marked by skip IDs.
2 Press SKIP PLAY to switch skip play
on/off, then press
3 (6 on the
front panel).
When you turn off skip play, the player ignores the skip IDs
and plays all tracks on the disc.
• If there were no skip IDs on the disc in the first place, the
SKIP PLAY button has no effect.