Panasonic NV-HS830 - Manual (Page 12)

12
• We recommend entering [S-VHS ET] into the cassette label on any
cassette that you have recorded using the S-VHS ET function so
that you will be able to distinguish such cassettes from VHS
cassettes.
The following table lists the playback formats that are
compatible with this VCR’s recording standard.
*1 SQPB stands for S-VHS quasi playback.
*2 Some models are not compatible.
Satellite or Digital Receiver
Connecting the VCR to a Satellite
Receiver or Digital Receiver
If the satellite receiver is equipped with a 21-pin scart socket
1 Satellite receiver (not supplied)
2
21-pin Scart socket
• If your satellite receiver has a VCR socket, connect the cable to it.
3 21-pin Scart cable (not supplied)
Set [AV2] to [EXT], [EXT LINK 1] or [EXT LINK 2].
For details, see page 21.
If the satellite receiver is not equipped with a 21-pin scart
socket
1 Satellite receiver (not supplied)
2 Aerial
Input socket
3 Aerial Output socket
4 Aerial (not supplied)
5 Aerial lead (not supplied)
6 RF coaxial cable (not supplied)
Hint:
• The RF output channel of the satellite receiver should be adjusted
away from channel 36, which is used by the VCR, e.g. re-adjust to
channel 33.
Cassette Recording
format
Compatible Playback
Equipment
VHS
VHS
(SP/LP/EP)
VHS, S-VHS,
VHS with SQPB *1
S-VHS ET
(SP)
S-VHS *2 ,
VHS with SQPB
S-VHS
VHS
(SP/LP/EP)
VHS, S-VHS,
VHS with SQPB
S-VHS
(SP/LP/EP)
S-VHS,
VHS with SQPB
1
2
3
1 2
3
4
5
6