Polycom 1 - Manual (Page 36)

Administrator’s Guide for Polycom HDX Systems
2 - 22
6. Select and configure these settings:
Connecting to an Analog Phone Line
You can connect an analog phone line to the Polycom HDX system to make
regular telephone calls with the system or to add audio-only participants to
video calls.
Pulse Width
(millisec) Specifies whether the system should set the pulse
duration automatically or use the number of milliseconds
you enter.
Setting Description
Setting Description
Enable Broadcast
Mode Enables support for H.331 broadcast transmissions
from the Polycom HDX system.
Broadcast mode enables the system to send video
and audio to many other systems, such as large
satellite networks.
Enable People+Content Enables People+Content for broadcast mode.
Video Format Specifies the resolution at which video is transmitted.
Video Protocol Specifies the protocol used to transmit video. Choose
the lowest protocol supported by all systems in the
conference.
Audio Protocol Specifies the protocol used to transmit audio.
Frame Rate Specifies the frame rate to use.
The country setting must be configured correctly on the Polycom HDX system to
ensure proper operation of the phone line and to comply with local telephony
regulations.