Pioneer S-EV500V - Manual (Page 53)

Additional information 15
53
En
English
Français
Deutsch
Nederlands
Italiano
Español
Cleaning the pickup lens
The DVD player’s lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners are commercially
available, we do not recommend using them
since some may damage the lens.
Problems with condensation
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although this won’t damage the player, it may
temporarily impair performance. You should
leave it to adjust to the warmer temperature for
about an hour before switching on.
Moving the system unit
If you need to move the main unit, first remove
a disc if there’s one in the player, then press
STANDBY/ON on the front panel to turn the
system off. Wait for GOOD BYE to disappear
from the display, then unplug the power cord.
1
Never lift or move the unit during playback—
discs rotate at high speeds and may damage.
Resetting the system
Use this procedure to reset all system settings
to the factory default. Use the front panel
controls to do this.
1 Switch the system into standby.
2 Press and hold the (stop) button for
about 7 seconds until the display shows
‘MEM.CLR?’
Use or to select it if it does not show
in the display.
3 Press the button.
All the system’s settings are now reset, and
you should see
Welcome in the front panel
display.
Note
1 Unplugging the unit before GOOD BYE disappears from the display may cause the system to return to the factory settings.
EV-500-1000.book 53 ページ ２００５年４月５日 火曜日 午後１２時３１分