Audio adjustments, Selecting the audio option to adjust, Balance / fader – Pioneer DEH-P5900IB User Manual
Page 21: Equalizer, Operating this unit, Introduction of audio adjustments, Using balance adjustment, Using the equalizer
Audio Adjustments
Introduction of audio adjustments
1
1
1
1 Audio display
Shows the audio adjustment status.
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option; press to se-
lect.
The audio function name appears on the dis-
play.
3
Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL to switch between the
audio functions in the following order:
Fader (balance adjustment)
—Powerful (gra-
phic equalizer adjustment)
—50Hz (7-band
graphic equalizer adjustment)
—LOUD (loud-
ness)
—Sub W.1 (subwoofer on/off setting)—
Sub W.2 (subwoofer setting)
—Bass (bass
boost)
—HPF (high pass filter)—SLA (source
level adjustment)
# You can also select the audio function by
pressing
AUDIO on the remote control.
# You can select the Sub W.2 only when sub-
woofer output is turned on in
Sub W.1.
# When selecting the FM tuner as the source,
you cannot switch to
SLA.
# To return to the display of each source, press
BAND.
# If you do not operate functions except for
50Hz within about 30 seconds, the display is
automatically returned to the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1
Use MULTI-CONTROL to select Fader.
# If the balance setting has been previously ad-
justed,
Balance will be displayed.
2
Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 26.
3
Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L 15 to R 15 is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
Powerful
Powerful
Natural
Natural
Vocal
Vocal
Operating this unit
En
21
English
Section
02