Polaris 340 Edge - Manual (Page 120)

118
MAINTENANCE
General Maintenance
Torque Stop
If your snowmobile is equipped
with an engine torque stop (1),
periodically check torque stop
clearance. With clutches in
proper alignment, the torque stop
clearance should be a minimum
of .010″ to a maximum of .030″
from the engine case (2). Adjust
if necessary, and lock the jam
nut.
Reverse Kit Maintenance
If your snowmobile is equipped with reverse, or if you have a reverse
kit installed, it’s especially important to maintain track tension as
specified on page 122.
Allow the engine to reach idle speed before attempting to shift into or
out of reverse.
2 1
Improper track tension can cause serious damage to the
snowmobile, which can result in loss of vehicle control and serious
injury or death. Always maintain the track tension as specified.
WARNING
Damage will occur to chaincase or transmission if shifting is
attempted before the machine has come to a complete stop. Make
sure the snowmobile has completely stopped and the engine has
returned to idle speed before shifting gears.
CAUTION