NeoDigits.com NeoDigits Helios H4000 - Manual (Page 31)

29
HDMI MODE RGB
YCBCR422
YCBCR444
Video Options
Use the video options to set the levels of the various
video properties:
Color, Contrast, Brightness, Tint, Black level
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK
3. Use cursor to select VIDEO OPTIONS
4. Use cursor to select the desired property and press
OK
5.Use the cursor UP / Down to change the selected
value.
HDMI Mode
Use this option to manually select one of three available
HDMI modes ¨C YcbCr422 / YcbCr444 / RGB
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK
3. Use cursor to select HDMI MODE
4. Press OK repeatedly to select the desired setting
HDMI Select
This option is used to select the type of TV the player
is connected to from the HDMI output. You can connect
to a HDMI display or a DVI display using a HDMI-DVI
cable. There are three options for HDMI Select ¨C HDMI,
DVI, AUTO
1. Press SETUP on the remote control
2. Use cursor to select DISPLAY and press OK
3. Use cursor to select HDMI SELECT
4. Press OK repeatedly to select the desired setting