Navman Tracker500/500i - Manual (Page 31)

29 Tracker500/500i User Manual
13.3 Starting and Cancelling Routes
To start traversing a route, it must first be selected from the list of previously created routes.
The route can be traversed in the forward direction or in the reverse direction, allowing you
to return along the same route. You can also choose any waypoint in the route as the start
waypoint.
Note: To cancel an active route select STOP NAV from the Main
Selection screen. A message asking you to confirm that you wish to
cancel the active route will be displayed.
1. Choose to see the list of
routes currently stored in memory.
Select
2. Select the route from the list.
5. The list of waypoints included in the
route will be displayed. Move the cursor
to the first waypoint you wish to head
towards. By default, the first waypoint in
the route will be highlighted. Press the
cursor key to start the route from the
highlighted waypoint.
3. Select from the list of
available functions.
Go Along
4. Choose whether to traverse the
route in the forward direction or
the reverse direction.
Starting a Route