NEC PAGEWORKS 8E - Manual (Page 47)

2-17
Setting-Up
Setting-Up
Chap
te
r 2
Turning on the Printer
After connecting the printer to a power outlet, press the power switch
to turn it on.
Turning on the printer causes all the indicators on the control panel to
light, which indicates that the printer is warming up. In about 20
seconds, only the READY indicator remains lit, indicating that the
printer is ready to print.
Note
• The printer automatically enters a power saving mode if it receives no
print commands for about 15 minutes. Whenever the printer receives a
print command while in the power saving mode, it starts to warm up
again and takes about 20 seconds before it is ready to print.
PageWorks.book Page 17 Tuesday, April 21, 1998 3:55 PM