Tool tab, System, Diagnostic – NetComm V100 User Manual
Page 27: System diagnostic
Advertising
YML749Rev1
V100 User Guide
www.netcomm.com.au
27
Tool Tab
Clicking on the Tool tab displays the following window:
System
The System sub-tab displays the following options:
Save:
Saves any changes made to the configuration of the device.
Default:
Set the device to its default settings.
Reboot:
Reboot the device.
Diagnostic
Click on the Diagnostic sub-tab to display the following:
IP Address or Host Name:
Enter the IP address or host name you wish to test a ping
response from. Click Submit to execute the command.
Advertising