NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 98)

700 Series Managed Switch User’s Guide for Software v2.1
6-8 Command Line Interface
SM-10004-02
no shutdown
speed 100
duplex full
flow-ctrl
negotiation auto
switchport access vlan untagged 1
switchport access native 1
spanning-tree port-priority 128
spanning-tree cost 19
no spanning-tree fastlink
exit
--More--
SNMP
The show snmp command displays system information that will be reported to an SNMP agent,
including the Contact and the Location.
Syntax
FSM726# show snmp
Spanning Tree
The show spanning tree command displays the status and topology of the spanning-tree
configuration, as well as spanning-tree state of each port.
Brief
The show spanning-tree brief command gives a brief summary of the spanning-tree status.
Syntax
FSM726# show spanning-tree brief
An example of the display output is shown below.