NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 121)

700 Series Managed Switch User’s Guide for Software v2.1
Command Line Interface 6-31
SM-10004-02
Syntax
FSM726(config)# system radius authen-mode [local | local-then-remote | remote]
Where
Local = authentication is performed locally and not through an external RADIUS server
Local-then-remote = Authentication is performed locally first, then by an external RADIUS
server
Remote = Authentication is performed by a remote server and not locally.
• Server-IP
The Server-IP command is used to set the IP address of the RADIUS server
Syntax
FSM726(config)# system radius server-ip <IP-address>
Where
<IP address> = IP address of the RADIUS server
• Shared-Secret
The shared-secret command lets you set the RADIUS shared secret
Syntax
FSM726(config)# system radius shared-secret <shared secret>
Where
<shared secret> = the RADIUS shared secret
Reset
Use the reset command to reboot the switch.
Syntax
FSM726(config)# system reset