Nikon DLP 837 Series - Manual (Page 34)

34 4. TV Menus
Adjust, continued
P icture+
PerfectColor
PerfectColor Sliders Adjusts the saturation (intensity) of six colors for
the current image source.
PerfectTint Sliders
(837 series) Adjusts six hues for the current image source
Using PerfectColor:
Highlight the PerfectColor™ icon and press ENTER to display the PerfectColor menu. Settings are
retained independently for each TV input.
Using PerfecTint (837 Series):
• To switch between PerfectColor™ and PerfecTint™ adjustments, highlight Adjust Mode and
press .
• Press to move from one color bar to the next.
• Press to change settings.
• Press
CANCEL to restore default settings.
• Press MENU to return to the main menu.
Adv anced
Picture
Advanced Picture allows you to save highly customized picture adjustments
for each input. Mitsubishi recommends a professional installer make
these adjustments.
Press 1. MENU. Under Picture+, highlight the Advanced Picture icon and press ENTER.
With 2. Picture Mode highlighted, press ENTER to change from blank (undefined) to ADV.
837 Series: Choose ADV1 (daytime settings) or ADV2 (nighttime settings)
Use 3. to highlight an option you wish to change and press ENTER.
Press 4. to change settings.
Use 5. to navigate through the screen to additional options and press to change settings.
Press 6. MENU to close the menu. The Advanced Picture adjustments will be in effect for the
current input.
To use the custom Picture Mode at a later time
Press MENU and go to Adjust > Picture > Picture Mode and:
737 and C9 Series 837 Series
Select • SPECIAL if settings were saved by
your professional installer.
Otherwise select • ADV.
Sele • ct ISF Day or ISF Night if settings were
saved by your professional installer.
Otherwise select • ADV1 or ADV2.
To return to the default values for Advanced Picture
Display the Picture+ > Advanced Picture menu and:
737 and C9 Series 837 Series
Highlight RESET Pic Mode and press ENTER. Highlight the 1. Advanced Picture mode to change.
H 2. ighlight RESET Pic Mode and press ENTER.
Repeat this separately for both ADV1 and ADV2.
3 D Mode 3D Mode On, Off Use the On setting for video games and movies that require 3-D
glasses. This setting applies only to the current input.
Note: 3D options are available only for 1080p 60-Hz video
sources connected to an HDMI input.
Glasses L-R Standard,
Reverse Synchronizes the 3D glasses with the image on screen to provide
the best 3D effect. Try Reverse if Standard seems incorrect.