NetComm NP2724M - Manual (Page 8)

other than direct connections to the branch circuit (e.g. use of power
strips)."
To mount the Switch in any standard-sized, 19-inch wide, 1U high rack,
please follow these instructions:
Place the Switch on a hard flat surface with the front panel facing you. Attach
a rack–mount bracket to one side of the Switch with the supplied screws.
Then attach the other bracket to the other side. (Figure 2.6.1)
Figure 2.6.1
Make sure the brackets are properly attached to the Switch. Use the
appropriate screws (not included) to securely attach the brackets to your rack.
(Figure 2.6.2)
Figure 2.6.2
NP2724M User Manual 7