Nortel Networks BCM50 2.0 - Manual (Page 18)

18 Chapter 3 Installing the IP Softphone 2050
NN40050-300 NN40050-300
Installing the IP Softphone 2050
• The IP Softphone 2050 can be installed running the installation wizard from the IP Softphone
2050 CD.
To install using the IP Softphone 2050 CD
1 Exit any programs that are running.
2 Disable any anti-virus programs that are running.
3 Insert the IP Softphone 2050 CD into the CD-ROM drive of your computer.
If the install wizard starts, go to step 6. If the install wizard does not start, go to step 4.
4 Double-click the My Computer icon, and then double-click the CD icon.
5 Double-click the Setup icon.
6 Follow the instructions on the display to complete the installation.
7 Run the IP Softphone 2050 Configuration Tool to assign a server address and to configure
audio peripherals.
You can access the IP Softphone 2050 from the Start menu at Start > Programs > Nortel > IP
Softphone 2050.
You can access the IP Softphone 2050 Configuration Tool from the Windows Control Panel.
Additional installation steps for Windows 2000
If you are installing the IP Softphone 2050 on a computer using Windows 2000, you must:
• install the Windows QoS Packet Scheduler
• install the Nortel i2050 QoS Service
Note: If you have previously installed a version of the IP Softphone 2050, you must
uninstall the old version (through Add/Remove Programs) before installing this version.
Note: Install the Nortel USB Audio Kit before installing the IP Softphone 2050. By doing
this, you are presented with the option of using the USB Audio Device during installation
of the IP Softphone 2050.
Note: The installation files for the IP Softphone 2050 are not deleted by the installation
wizard. These files are stored in a folder named
C:\Program Files\Nortel\ClientInstall\IP Softphone 2050.
You can delete the installation files as they are not needed by the IP Softphone 2050.