NetComm V35 User Manual
Page 3
Connecting the V35 to a Desktop PC or Notebook.
1.
Plug the white USB connector into the USB Jack on the PC or
Notebook.
2.
Plug the pink Microphone jack into Microphone-in jack on the PC or
Notebook.
3.
Plug the green Speaker jack into speaker out jack on the PC or
Notebook.
Adjusting your PC’s sound settings.
As you are using your V35 you may experience noise or echoes in your
voice communications. If this occurs, please follow the instruction below to
adjust your systems sound setting.
1.
Click on the Start menu Control panel Sound and audio
device Volume tab, select the “Advance”, the volume control panel
will pop up.
2.
Make sure only the microphone mute check box is checked.
3.
Select “Advance” and ensure “Mic2 select” and “20dB boost” are
unselected.
4.
To maximize the volume of the V35, click on the Start menu
Control panel Sound and audio device Volume tab, select
the “Advance”. Adjust the speaker and wave to maximum.
5.
The V35 is designed to be muted manually on the device itself. Once
the built-in microphone is mute, the mute button will turn orange.