Connections – Niles Audio ZR-4630s User Manual
Page 48
48
CONNECTIONS
SYSTEM EXPANSION
5. System Expansion Input to System Expansion Output
Four-pair twisted cable, terminated with male RJ-45
plugs, connects multiple ZR-4630's using the System
Expansion Input and Output terminals. Connections are
made from the Input of one of the ZR-4630's to the
Output of another, and so on (for more information on
Terminating Four-Pair Twisted Cable, refer to page 44).
IR FLASHERS
6. Low-Output Flasher to the Flasher Outputs
The mini-plug end of a Niles Low Output MicroFlasher
™
,
Model MF-1 (FG01019), connects into the Flasher
Outputs 2-4. The Micro-Flasher portion is placed direct-
ly over the IR sensor of the corresponding source com-
ponent (Source 2 for Flasher 2, Source 3 for Flasher,
Source 4 for Flasher 4) and adheres with the included
peel-back tape.
7. High-Output Flasher to the Flasher Outputs
The mini-plug end of a Niles High Output Flasher, Model
IRB-1 (FG01023), connects to the Flasher Output labeled
ALL. The IRB-1 is strategically positioned to provide IR
transmission to all source components and adheres with
its included Velcro mounting system.
HOME THEATER CONTROL SYSTEM
8. IR Output of a Home Theater Control System to the IR In
The mini-plug end of a Niles Accessory Cable (FG00724)
connects a Home Theater Control System to the IR Input.
12V CONTROL SIGNALS
9. 12V Control Output to a Voltage Triggered Device
The mini-plug end of a Niles Accessory Cable (FG00724)
connects the 12V Control Output to the Trigger Input of a
voltage-activated device (i.e., Niles AC-3).
AM/FM ANTENNAS
1. FM Dipole Antenna
The included FM Dipole Antenna connects to the female
75-Ohm coaxial connector labeled FM on the chassis.
The antenna is then positioned and mounted for proper
reception.
1. AM Loop Antenna
The included AM Loop Antenna connects with its bare-
wire ends to the spring-loaded terminals labeled AM and
GND. The antenna is then positioned and mounted for
proper reception.
SOURCE-COMPONENT AUDIO SIGNALS
1. Audio Output of Source Components to the ZR-4630
Male-to-male RCA Audio Cables connect the three exter-
nal audio sources.
TELEPHONE PAGING
1. Paging Output of Telephone System to ZR-4630
Page Input
A male-to-male RCA Audio Cable connects the paging
output of a telephone system to the ZR-4630.
PREAMPLIFIER ZONE OUTPUTS
1. Zones 1-6 (4-6 set to Variable Mode)
Male-to-male RCA Audio Cables connect Zone Outputs
1-6 to an external amplifier for more power in a zone
(refer to System Configurations 8 & 9 for more details).
1. Zones 4-6 Set to Fixed Mode
Male-to-male RCA Audio Cables connect Zone Outputs
4-6 (set to fixed output mode) to an external amplifier for
more rooms in a zone (refer to Configuration 10 for more
details).
SPEAKERS
1. Zones 1-6
Connects speaker wires from the speakers placed in the
listening zones.
AC POWER
1. Removable AC Power Cord
The removable AC power cord (included with the ZR-4630)
connects to the removable power-cord socket and to an AC
power outlet.
4
5
6
7
8
9
10
11
14
15
1
16
17
5
6
7
8
9
10
11
14
15
1
16
17
5
6
7
8
9
10
11
14
15
1
16
17
5
6
7
8
9
10
11
15
1
16
17
6
7
8
9
10
11
10
11
3
4
5
6
7
8
9
10
11
14
15
13
16
17
1
2
3
4
5
6
7
8
9
1
12
14
15
13
12
14
15
13
16
17
1
2
3
4
5
6
7
8
9
1
11
12
14
15
13
16
17
1
2
3
4
5
6
7
8
9
10
11
12
14
15
13
16
17
1
2
3
4
5
6
7
8
9
10
11
14
15
13
16
17
2
3
4
5
6
7
8
9
10
11
14
15
13
16
17