National Instruments 2 SD Card Memory Module NI 9802 - Manual (Page 2)

NI 9802 Operating Instructions and Specifications 2 ni.com
The National Instruments 9802 is an SD Card storage module that
can read from and write to SD Cards.
Note The NI 9802 is supported only in CompactRIO
active chassis, such as the cRIO-910x.
This document describes how to use the NI 9802 and includes
specifications for the NI 9802. For information about installing,
configuring, and programming the system, refer to the system
documentation. Visit
ni.com/info and enter the info code
rdsoftwareversion to determine which software you need for
the modules you are using.
Note The safety guidelines and specifications in this
document are specific to the NI 9802. The other
components in the system might not meet the same safety
ratings and specifications. Refer to the documentation for
each component in the system to determine the safety
ratings and specifications for the entire system.