NETGEAR ETHERNET SWITCH SW108 - Manual (Page 21)

Installation 4-1
Chapter 4
Installation
This chapter provides information about installing the Model SW108 Ethernet switch and
information about verifying installation.
Preparing the Site
Before you begin installing the switch, prepare the installation site. Make sure the operating
environment meets the physical requirements of the equipment as described in Appendix A,
“Technical Specifications.”
Package Contents
This package should contain the following items:
• Model SW108 Ethernet switch
• DC power adapter
• Warranty and Owner Registration Card
• This installation guide
Call your reseller or customer support in your area if there are any wrong, missing, or damaged
parts. Refer to page iii for the location of customer support in your area.
Keep the carton, including the original packing materials. Use them to repack the switch if you
need to return it for repair.
To qualify for product updates and product warranty registrations, fill in the Warranty and Owner
Registration Card within 30 days of purchase and return it to NETGEAR, Inc.
SW108.BK Page 1 Friday, June 27, 1997 10:48 AM