Nikon Speedlight SB-600 - Manual (Page 15)

15
● ● ●
Characteristics of the LCD panel
• Due to the directional characteristics of LCDs, the display is difficult to read when viewed
from above. However, the display can be seen clearly from a slightly lower angle.
• The LCD display becomes darker at high temperatures (approx. 60°C/140°F), but
returns to normal at normal temperatures (20°C/68°F).
• The LCD’s response time decreases at low temperatures (approx. 5°C/41°F and below),
but returns to normal at normal temperatures (20°C/68°F).
u Using the SB-600 in dim light
Press any button on the SB-600 to turn the illuminator on (when the SB-600
power is on), and it will remain lit for 16 seconds.
• To cancel the LCD panel illumination, go to the Custom Settings mode (p. 52) and set it
to OFF.
• Even if the LCD panel illuminator is set to OFF, the SB-600’s LCD panel illuminator turns
on when the camera’s LCD panel illuminator is turned on. The LCD panel illuminator also
lights up when the Custom Settings mode is displayed.
* CLS: Creative Lighting System (p. 5)
Prepar
ation